Your One-Stop Solution For Industrial Cleaning Equipment

Your One-Stop Solution For Industrial Cleaning Equipment

INDUSTRIAL • COMMERCIAL • HAZARDOUS DUST

INDUSTRIAL & COMMERCIAL VACUUM CLEANERS

From everyday commercial cleaning to hazardous and combustible dust recovery, R&S Industrial Cleaning Equipment can help identify a vacuum solution suited to your material, working environment and operational requirements.

✓ Commercial & industrial vacuum solutions
✓ Hazardous-dust filtration options
✓ ACD combustible-dust machines
✓ ATEX / Zone 22 industrial vacuums
Nilfisk industrial vacuum cleaner available from R&S Industrial Cleaning Equipment
A selection of recommended machines is shown below. Additional vacuum models and configurations are available.
Commercial Everyday professional cleaning
Hazardous Dust Dust-class filtration options
ACD Combustible dust solutions
ATEX Classified-area equipment
Start With The Application

Not Every Industrial Vacuum Does The Same Job

The correct vacuum depends on much more than suction power. Material type, hazardous-dust classification, combustible-dust risk, collection volume, cleaning frequency, power supply and the classification of the area in which the vacuum operates can all influence equipment selection.

01

Commercial Vacuums

Professional vacuum cleaners for routine cleaning across offices, facilities, workshops, warehouses and general commercial or industrial environments.

Discuss Your Requirements →
02

Hazardous Dust Vacuums

Vacuum solutions where the dust being collected requires appropriate filtration and containment rather than a standard commercial vacuum.

Ask About Dust Classes →
03

ACD Combustible Dust

Purpose-designed vacuum solutions for appropriate collection of combustible dust in suitable areas outside ATEX-classified zones.

View ACD Solutions →
04

ATEX / Zone 22

Specialist industrial vacuum equipment for appropriately classified hazardous areas where combustible dust can create an explosive atmosphere.

View Zone 22 Solutions →
Choosing The Correct Vacuum

Understanding ATEX & Industrial Vacuum Selection

When hazardous or combustible dust is involved, machine selection needs to go beyond capacity and suction performance. The dust itself, the environment where the machine will operate and any hazardous-area classification should all be considered.

This Nilfisk guide provides a useful introduction to some of the considerations involved when choosing industrial vacuum equipment for ATEX and specialist dust applications.

Understand why the application matters before choosing a machine
Consider the dust being collected as well as the operating environment
Establish whether the working area has an existing ATEX classification
Talk to R&S if you need help narrowing down the equipment options
▶ Nilfisk: How to choose the right vacuum for ATEX applications
An Important Distinction

Combustible Dust Does Not Automatically Mean ATEX

Materials such as flour, sugar, starch, cereal dust and some other fine powders can be combustible. However, the presence of a combustible material does not automatically mean that every area in which it is handled is an ATEX-classified hazardous zone.

The site’s DSEAR assessment and hazardous-area classification should determine whether the location where the vacuum will operate is classified.

Non-ATEX Classified Area

Where combustible dust needs controlled collection but the operating location is not classified as an ATEX hazardous zone, an appropriately selected ACD machine may be suitable.

ATEX Zone 22 Area

Where the location in which the vacuum operates has been classified Zone 22, appropriately certified Zone 22 equipment should be selected.

Unsure?

R&S can help explain the available machine options. The site’s hazardous-area classification should be established by the employer or other competent person responsible for the risk assessment.

Bakery • Food • Powdered Ingredients

Collecting Flour, Sugar Or Other Fine Dust?

In bakeries and food-production environments, dry sweeping can disturb settled flour and other fine materials and return dust to the air rather than controlling it at source.

Choosing a vacuum for these applications is not simply a question of selecting the largest machine. The material, quantity, frequency of cleaning, hazardous-dust requirements and whether the operating area is ATEX classified all need to be considered.

Flour and cereal dust
Sugar and powdered ingredients
Cleaning around mixers and production machinery
Production-floor housekeeping
ACD and ATEX options depending on site requirements
Industrial vacuum cleaning in a bakery and food production environment
Choosing The Right Machine

What R&S Will Want To Understand

Rather than simply recommending a vacuum from a photograph, we’ll look at the application and help narrow down the appropriate equipment options.

1

What Are You Collecting?

Dust, flour, powders, swarf, general debris, hazardous material or another substance can all require different equipment.

2

Where Will It Operate?

The working environment and any DSEAR or hazardous-area classification are important when assessing combustible dust.

3

How Much Material?

Collection volume helps determine whether a compact 15–30 litre machine or a higher-capacity industrial vacuum is more practical.

4

How Will It Be Used?

Occasional housekeeping, frequent cleaning and continuous-duty production applications place very different demands on equipment.

Need Something Different?

Can’t See The Vacuum You Need?

The products shown on this page are a selection of recommended commercial and industrial vacuum solutions — they are not the full range available through R&S. We can source and specify additional machines with different capacities, filtration systems, power supplies, collection methods and hazardous-area certifications.

Tell Us What You Need

Or call 01604 760282

Full Lifecycle Support

More Than Simply Selling A Vacuum

R&S supports professional cleaning equipment throughout its working life — helping customers select, maintain and repair the equipment used across their sites.

Sales & Equipment Advice

Commercial and industrial vacuum solutions selected around the application rather than simply the model.

Servicing

Planned servicing and inspection to help keep professional vacuum equipment operational and properly maintained.

Repairs & Breakdown Support

Engineering support where professional cleaning equipment develops a fault or requires repair.

Parts, Filters & Accessories

Support sourcing replacement filters, hoses, tools, bags and machine components.

Frequently Asked Questions

Industrial Vacuum Cleaner FAQs

Does R&S supply more vacuum cleaners than those shown on this page?
Yes. The machines displayed here are a selection of recommended commercial and industrial vacuum solutions. R&S can access additional models and configurations to suit different capacities, dust types, filtration requirements, power supplies and working environments.
What is the difference between an ACD vacuum and an ATEX vacuum?
ACD equipment is designed for appropriate collection of combustible dust in suitable areas outside ATEX-classified zones. If the operating location itself is classified as a hazardous ATEX zone, appropriately certified equipment for that zone should be selected.
Do I need an ATEX vacuum for flour dust?
Not automatically. Flour can be combustible, but that does not mean every area where flour is present is classified as an ATEX hazardous area. The site’s DSEAR assessment and hazardous-area classification should determine whether ATEX-certified equipment is required in the location where the vacuum will operate.
What does M-Class mean on a vacuum cleaner?
M-Class relates to hazardous-dust filtration and containment requirements. The correct dust class should be selected according to the substance being collected, occupational exposure requirements and the application.
Can R&S help me choose the correct industrial vacuum?
Yes. R&S can discuss the material being collected, quantity, cleaning frequency, power supply and working environment to help narrow down suitable equipment options. Formal hazardous-area classification remains the responsibility of the site and its competent assessment.
Can R&S service and repair industrial vacuums?
Yes. R&S provides servicing, repairs, replacement filters, parts and technical support for professional industrial cleaning equipment.
Talk To R&S

Tell Us What You Need To Collect

Whether you need a commercial vacuum, hazardous-dust machine, ACD combustible-dust solution or equipment for a classified ATEX environment, start by telling us about the material, site and how the machine will be used.

Looking for flexible industrial cleaning equipment hire in Northampton? View our full hire range including scrubber dryers, sweepers, pressure washers and specialist equipment.

You cannot copy content of this page